Motor Mounting Tolerances: Align the Feet Before the Coupling
Motor mounting tolerances explained: soft foot limits, coupling alignment targets by speed, shimming practice, baseplate quality, thermal growth and re-check intervals.
Gearbox Breather and Ventilation Guide: Keeping Water and Dust Out of the Sump
How gearbox breather and ventilation really works: why sealed cases inhale, breather types compared, mounting position, dusty and wash-down sites, condensation control and oil care.
Gearbox Foundation and Alignment Guide: Getting the Installation Right
How to install a gearbox correctly: foundations and baseplates, soft foot, shaft alignment methods, torque-arm and hollow shaft mounting, and the baseline records worth keeping.
Gearbox Backstop and Holdback Guide for Inclined Conveyors
How a gearbox backstop and holdback work on inclined conveyors: sprag vs roller vs pawl, torque sizing, mounting position, lubrication and inspection.
Overland Conveyor Gearbox Guide for Long-Distance Drives
How to specify a gearbox for an overland conveyor: tension, decline power return, loaded starts, drive station layout and the service plan remote sites need.
Hollow Shaft Gearbox Mounting: A Practical Field Guide
How to mount a hollow shaft gearbox correctly: bore and keyway fits, torque arms, end plates, brake discs and the checks that prevent shaft damage and misalignment.
Building a Gear Oil Analysis Programme for Gearboxes
A practical guide to gearbox oil analysis: which tests matter, how often to sample, how to read wear trends and how to turn a laboratory report into a maintenance decision.
Gearboxes for Port and Marine Duty: Salt, Load and Reliability
Port and marine drives face salt air, shock loads and relentless cycles. See how duty profiles, corrosion protection and sealing decide which industrial gearbox survives the quayside.
Crane Gearbox Selection: Hoist, Trolley and Travel Drives
Selecting a gear reducer for crane duty? See how hoist, trolley and travel drives differ in duty class, shock and braking, and how to size each so the crane runs for decades.
IE5 Motor and Gearbox Matching: What Higher Efficiency Demands
Matching an IE5 motor with a gearbox? See what higher efficiency changes for torque, ratio, inverter choice and thermal duty, and how to specify the pair so both run at their best.
Worm vs Cycloidal Reducer: Ratio, Backlash and Shock Load
Comparing a worm vs cycloidal reducer? See how the two mechanisms differ on ratio depth, backlash, shock loads, heat and duty cycle, and pick the right one per job.
Speed Reducer for Sale: A Buyer's Guide to Reading Listings Right
Searching for a speed reducer for sale? Learn the four numbers that decide the purchase, what cheap listings hide, and how to turn a marketplace listing into a proper enquiry.
Gearbox Painting and Corrosion Protection for Plant Drives
How to specify gearbox painting and corrosion protection: surface preparation, paint systems by environment, touch-up discipline, hot and dusty halls, coastal sites and the enquiry lines that decide coating life.
Screw Jack Lifting Systems: Selection and Synchronisation
How to size a screw jack lifting system: load per jack, travel, speed, worm ratio, self-locking, and how to keep two to four jacks synchronised.
Retrofitting a Conveyor Drive: Planning a Gearbox Upgrade Without Stopping the Plant
How to plan a gearbox retrofit on a running conveyor: what to survey before ordering, ratio and shaft-height traps, mounting changes, coupling reuse, the installation window and commissioning checks.
Brake Motor vs Standard Motor for Gearboxes: When You Need Braking
Brake motor or standard motor behind your gearbox? Holding loads on inclines, stopping times, backstops versus brakes, where the brake should sit in the drive line, and what the braking duty does to gearbox selection.
MBY Mill Gearbox: Edge Drive Reducers for Grinding Mills
How MBY mill gearboxes drive grinding mills at the shell: edge drive arrangements, load profile, lubrication and cooling, foundation and retrofit realities, and what to put in an enquiry.
Gearbox Commissioning Checklist for New Drive Installations
A practical gearbox commissioning checklist: pre-fill checks, oil levels, first starts, temperature and noise records - catch installation faults while they are still cheap.
Foot Mounted vs Flange Mounted Gearbox: How to Choose
Foot mounted gearbox or flange mounted? Compare foundations, alignment, overhung loads and maintenance to pick the right mounting for your drive - with a selector to check it.
RXG Shaft Mounted Gearbox: Hanging Drive for Conveyors
How an RXG shaft mounted gearbox works, how the size range and torque arm fit a conveyor head shaft, and the three numbers that decide which unit you need.
